Skip to content
View in the app

A better way to browse. Learn more.
OSBot :: 2007 OSRS Botting

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
  • gsmneo

Gsmneo ((free)) «Must Read»

| GSMNeo Pin | Connect to | |------------|-------------| | VCC | 3.8V–4.2V (peak current up to 2A) | | GND | Common ground with microcontroller | | TXD | Microcontroller RX (use level shifter if 5V logic) | | RXD | Microcontroller TX (level shift) | | PWR_KEY | Pull low for 1–2 seconds to power on |

AT → OK (module responds) ATE0 → Echo off AT+CPIN? → Ready (if SIM inserted) AT+CREG? → +CREG: 0,1 (registered) AT+CSQ → Signal quality (rssi) AT+CMGF=1 → SMS text mode A. Remote Alarm via SMS Connect a sensor (PIR, water leak, temp) to a microcontroller. When triggered, GSMNeo sends: gsmneo

AT+CMGS="+1234567890" > ALERT: Water leak detected in basement.␛ Pair GSMNeo with a GPS module. Every 5 minutes, send location via HTTP POST: | GSMNeo Pin | Connect to | |------------|-------------|

⚠️ power GSMNeo directly from an Arduino’s 5V pin – it will cause resets. Use a dedicated 2A+ regulator or Li-ion battery. 3. Basic AT Command Sequence After power-on and waiting ~5 seconds for network registration: Remote Alarm via SMS Connect a sensor (PIR,

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.